Water-soluble insulating non-stick coating with high permeability based on quartz and aluminum silicates. The special composition of the coating has the effect of self-filling and self-smoothing, which allows you to obtain a very smooth surface of castings. Provides optimal protection against metal penetration.
Packaging | Buckets 20 lt Metal drum 200 lt Steel containers 1,100 lt |
Appearance | red- brick colored cream |
Manufacturer | Italy |
Packaging | Buckets 20 lt Metal drum 200 lt Steel containers 1,100 lt |
Price | Contractable |
Delivery | New mail, Delivery, SAT and auto delivery |
Physico-chemical properties | Specific weight at 20°C kg/l – 1 ,36-1,50 Solids content 52%±2% |
Application
The product is used for painting cold box, hot box and shell moldin rods in the production of castings for the automotive industry.
IRON CAST CR 90 is designed for immersion application. In this case, the product is diluted with water in a proportion of 50 to 80 wt.h. of water for every 100 wt. coating, until a density of 25-35 Bé and a viscosity of 11.5-13.5 sec are reached. according to DIN/4.
The optimal proportion of dilution is determined experimentally for each production, because depends on the conditions of use and the desired result.
The product must be thoroughly mixed before use.
Our advantages:
• A wide range of products for any task
• Permanent stock of products in the warehouse in Kharkiv and Lviv
• Prompt execution of orders
• Technical support
• Maximum benefit from cooperation for high quality products