A new furan-phenol resin with a low nitrogen content and a furfuryl alcohol content of at least 40%.
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Appearance | dark amber liquid |
Manufacturer | Italy |
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Price | Negotiable |
Delivery | New mail, Delivery, SAT and auto delivery |
Physico-chemical properties | Specific weight at 20° C kg/l 1.14-1.18 Viscosity at 20° Din/4, sec. 15-25 |
Application:
The resin is used together with HARDENER CA acid catalysts, the curing time is possible from 10 to 120 minutes depending on the catalyst used (see
technical sheets for catalysts) .
Recommended dosage and mixing sequence:
1) Dry clean sand – 100%
2) Catalyst – from 20% to 60% of the resin weight
3) ECOFUR 6100 EXTRA resin – from 0.8% – 1.2% of the weight of sand
Note: for fast hardening or for the winter season, it is necessary to select hardeners with high reactivity.
A resin with good reactive and strength characteristics for the production of rods and molds for gray and high-strength cast iron using regenerated sand, with a low consumption of hardener.
Our advantages:
• A wide range of products for any what are the tasks
• Permanent stock of products in the warehouse in Kharkiv and Lviv
• Prompt execution of orders
• Technical support
• Maximum benefit from cooperation for high quality products p>