Menu
RESIN RESOFEN PLUS.SETTE
Cold-curing phenolic alkali resin cured with ester hardeners for the Alpha-Set process (Alpha-Set)
![](https://asteelm.com/wp-content/uploads/2024/07/resofen-plus.sette_-300x273.jpg)
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Appearance | A viscous red liquid |
Manufacturer | Italy |
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Price | Contractable |
Delivery | New mail, Delivery, SAT and auto delivery |
Physico-chemical properties | Specific weight at 20° C kg/l 1.22-1.26 Viscosity at 20° Din/4, sec. 25-35 |
Application
“Recommended dosage and mixing sequence:
1) Dry clean sand – 100%
2) Hardener RSF-TRAGUM – from 15% to 30% of weight of resin.
3) Resin RESOFEN PLUS.SETTE – from 1% to 1.5% of the weight of sand.
When using in a mixture of regenerated sand, add water in the amount of 15% to 20% of the weight of the resin.
Our advantages:
• A wide range of products for any task
• Permanent stock of products in the warehouse in Kharkiv and Lviv
• Prompt execution of orders
• Technical support
• Maximum benefit from cooperation for high quality products
It is used for the manufacture of rods and molds in the production of steel and iron castings using fresh and regenerated sand, suitable for furnace and non-furnace molding. The resin is used together with hardeners of RSF brands – TRAGUM,
hardening time is possible from 15 to 120 minutes, depending on the hardener used (see the technical sheets on the hardener).![](https://asteelm.com/wp-content/uploads/2024/07/cesafur-i-resofen-300x300.jpg)