Asteelm

ADDRESS: St. Kovtun, 60 Kharkiv Ukraine

TEL: +38 057 719-14-90
+38 097 720-20-72 Viber, Telegram, WhatsApp
mail@asteelm.com

RESIN RESOFEN PLUS.SETTE

Cold-curing phenolic alkali resin cured with ester hardeners for the Alpha-Set process (Alpha-Set)

Packaging Metal barrels 200 l
Plastic containers 1,000 l
Appearance A viscous red liquid
Manufacturer Italy
Packaging Metal barrels 200 l
Plastic containers 1,000 l
Price Contractable
Delivery New mail, Delivery, SAT and auto delivery
Physico-chemical properties Specific weight at 20° C kg/l 1.22-1.26
Viscosity at 20° Din/4, sec. 25-35

Application

It is used for the manufacture of rods and molds in the production of steel and iron castings using fresh and regenerated sand, suitable for furnace and non-furnace molding. The resin is used together with hardeners of RSF brands – TRAGUM,

hardening time is possible from 15 to 120 minutes, depending on the hardener used (see the technical sheets on the hardener). “Recommended dosage and mixing sequence: 1) Dry clean sand – 100% 2) Hardener RSF-TRAGUM – from 15% to 30% of weight of resin. 3) Resin RESOFEN PLUS.SETTE – from 1% to 1.5% of the weight of sand. When using in a mixture of regenerated sand, add water in the amount of 15% to 20% of the weight of the resin. Our advantages: • A wide range of products for any task • Permanent stock of products in the warehouse in Kharkiv and Lviv • Prompt execution of orders • Technical support • Maximum benefit from cooperation for high quality products

CONTACT US