FURAN RESIN CESAFUR 2017
Liquid resin for the No-Bake Furan process with low odor for both molding and metal casting. It is characterized by a high content of furfuryl alcohol and high strength characteristics, has increased reaction characteristics, while maintaining good plasticity during edging.
The resin does not contain nitrogen and water, so it is excellent for making steel castings.
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Appearance | A dark amber-colored viscous liquid |
Manufacturer | Italy |
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Price | Negotiable |
Delivery | New mail, Delivery, SAT and auto delivery |
Physico-chemical properties |
Specific weight at 20°C kg/l 1.12-1.18 Viscosity at 20° Din/4, sec. 10-20 |
Application
The resin is used together with acid catalysts brands HARDENER CA,
hardening time is possible from 10 to 120 minutes depending on the used catalyst (see technical sheets for catalysts).
Recommended dosage and mixing sequence:
1) Dry clean sand – 100%
2) Catalyst – from 30% to 70% of resin weight
3) CESAFUR 2017 resin – from 0,
7% to 1.2% of the weight of sand
Note: for fast hardening or for the winter season, it is necessary to select hardeners with high reactivity. It is used for the production of rods and forms in the production of castings from steel, gray and high-strength cast iron.
Our advantages:
• A wide range of products for any task
• Permanent stock of products in the warehouse in Kharkiv and Lviv
• Prompt execution of orders
• Technical support
• Maximum benefit from cooperation for high quality products