FURAN-PHENOL RESIN ECOFUR 6100 EXTRA
A new furan-phenol resin with a low nitrogen content and a furfuryl alcohol content of at least 40%.
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Appearance | dark amber liquid |
Manufacturer | Italy |
Packaging | Metal barrels 200 l Plastic containers 1,000 l |
Price | Negotiable |
Delivery | New mail, Delivery, SAT and auto delivery |
Physico-chemical properties | Specific weight at 20° C kg/l 1.14-1.18 Viscosity at 20° Din/4, sec. 15-25 |
Application:
The resin is used together with HARDENER
CA acid catalysts, the curing time is possible from 10 to 120 minutes depending on the catalyst used (see
technical sheets for catalysts).
Recommended dosage and mixing sequence:
1) Dry clean sand – 100%
2) Catalyst – from 20% to 60% of the resin weight
3) ECOFUR 6100 EXTRA resin – from 0.8% – 1.2% of the weight of sand
Note: for fast hardening or for the winter season, it is necessary to select hardeners with high reactivity.
A resin with good reactive and strength characteristics for the production of rods and molds for gray and high-strength cast iron using regenerated sand, with a low consumption of hardener.
Our advantages:
• A wide range of products for any what are the tasks
• Permanent stock of products in the warehouse in Kharkiv and Lviv
• Prompt execution of orders
• Technical support
• Maximum benefit from cooperation for high quality products